Your Source For Sealer Parts - Impulse Hand Sealer Parts - Foot sealer Parts - Automatic
Sealer PartsVacuum Sealer Parts - Amerivacs - Promarks - 1000's of Parts in Stock - Ph (760) 522-8389 FAX (760)-477-6238
Hand Impulse sealers for sealing all types of poly bags -Covers & heat elements for Hand Impulse sealers
PTFE COVERS FOR SEALERS MADE IN USA
|Bulk Bags of PTFE Covers (Lower Adhesive & Upper Non-Adhesive )Covers plus
Heat Element Wires for Hand Impulse Sealers. SAVE 20%
Please SCROLL DOWN for all the products.
Wire elements in bulk here
|PRE-CUT to SAVE Time &
Money easier to distribute
to multiple work stations
eliminate cutting to size and
|6 MIL ADHESIVE PTFE Covers for UNDER the wire seal element pre-cut to size.
PEEL OFF Yellow backing tape to apply. Most important to change both
covers when replacing wire element. 20 Pcs. per bag all lower adhesives are 1/2" wide
|IMPORTANT WN-500 to 1500 AIE & some other Machines use a wider upper covers
eg:12" we must have MAKE & MODEL # information to give you a price on these wider
bulk orders contact us before ordering if in doubt. Thank You.
|IMPORTANT WN-500 to 1500 &AIE 800T plus many other Machines use a wider upper cover & in some
cases wider LOWER cover to quote you please contact us with your MODEL MAKE & NUMBER .
We must have this information to give you a price on these wider bulk orders Thank You.
Fiberglass Tape Coated with PTFE
Protect your poly bag and shrink wrap equipment.
• Acts as a protective barrier to hot wire contacts.
TAPE - Adhesive tape is used under the heating wire. For use with all sealers.
• 3 and 5 mil - Silicone adhesive. 3" core.
• 10 mil - Thicker tape withstands heat over twice as long. Acrylic adhesive.
FABRIC COVER - Place over the heating wire. No adhesive.
• Use with table-top sealers up to 20".
|Foodsaver TM PTFE cover strips
Sealing Strip - This is a PTFE adhesive
that serves as a barrier between the heating
element and body of the sealer.
When the sealer's heating wire has burned
through the sealing strip, the heating element will
break which could also result in more damage to
other sealer parts. TWO FOR $11.95
With FREE SHIPPING
SAVE YOUR OLD FOODSAVER !
We recommend changing the sealing
strip whenever you see that the strip
appears worn or discolored.
The sealing strip we carry measures
16" x 1/2" (L x W)
which is slightly wider than FoodSaver sealing
strips, but will work on your FoodSaver sealers.
EASILY TRIM WITH SCISSORS