Bags & Rolls
KF-AIE - TISH - FS - Weston - WN Series - Shrink System Parts
Your Source For Sealer Parts - Impulse Hand Sealer Parts - Foodsaver Rolls
Foot sealer Parts - Automatic Sealer Parts- Bag Heat Sealer
Vacuum Sealer Parts - Amerivacs - Promarks - 1000's of Parts in Stock
Ph 760-522-8734 FAX 760-888-2000
Hand Impulse sealers for sealing all types of poly bags & heat sealable products
|Provide model of the machine, materials up to 40" wide and 10 mil thick can be sealed. The seal width rangically beeps when seal is done. Once the timer is
set, it will give a consistently flat seal. Easy to operate. Simply set the timer, insert bag between the impulse sealing bars, press down, and release.
Impulse Sealers Can Seal the Following Materials:
Polyethylene Saran Kel-F - Polyurethane Nylon Polyflex - Polyvinylchloride Bubble Packs Mylar®
Polypropylene Padded Mailers Tyvek® - Pilofilm Foil Surlyn - Polyvinyl Alcohol Coated Bags Other Heat Sealable Materials
Round Wire for Cut & Seal available on most impulse hand sealers. Used mainly for Shrink wrap.
We also supply a large variety of Ziplock Bags- recloseable bags for storage and shipping ,ziploc bags with or without white writing block, ziplok bags with
hang hole 2 mil & 4 mil ziplock bags, selling ziplock bags since 1979.Quality guaranteed on all poly bags.We sell FDA Approved Ziplock bags only.New
|Inquiries - Email email@example.com
Impulse Sealers - Adding a dwell step to the sealing process
The most common question we receive from our dealers and your customers is:
Why does the seal appear over-melted or under-melted when using an impulse sealer ?
The key is the DWELL process. Because impulse sealers are manual sealers, a manual dwell step must be added to your sealing process to make a proper seal.
Hold the upper jaw or seal arm down for an additional 2-4 seconds after the light goes off to set or congeal the seal.
Also make sure you start with the lowest heat setting and work up slowly depending on the thickness of you bags.
MADE IN USA
|Foodsaver TM PTFE cover strips
Sealing Strip - This is a PTFE adhesive
that serves as a barrier between the heating
element and body of the sealer.
When the sealer's heating wire has burned
through the sealing strip, the heating element
will break which could
also result in more damage to other sealer parts.
TWO FOR $9.95
FREE SHIPPING !
We recommend changing the sealing strip
you see that the strip appears worn or
discolored.The sealing strip we carry measures
16" x 1/2" (L x W)
FoodSaver sealing strips,
will work on your FoodSaver sealers.EASILY
TRIM WITH SCISSORS
We also carry lengths in 10 and 36 yardsl
|NEW ! Dust Cover for your Sinbo vacuum
sealer made in USA from strong "Parapak"
material (Similar to tents) GREAT GIFT IDEA
with FREE Shipping (USA)